Esfera exterior white primer protects the wood from factors that cause deformation such as fungi and mold, with its fungicidal properties. It has barrier and insulating properties against resin that may leak from the applied surface in order to preserve the decorative appearance and usage time of the EN 71-3 Certificate
Esfera exterior white primer series is water-based. These ready-to-use products are very easy to apply. Forming a thin film layer on the wood, the white primer series penetrates deeply into the wood and gives white color while preserving the natural texture. With its impregnation feature, it prevents ruptures and partial breaks.
Water
based
based
It provides safe application and use-area
with EN 71-3 Certificate.
with EN 71-3 Certificate.
Ready
to use.
to use.
Easy
application.
application.
Creates a thin film layer.
It penetrates deeply into wood. (3 mm)
Preserving its natural texture, It colors the wood.
Due to its impregnation feature, it prevents ruptures and partial breaks.
With its high filling power, it hides the pores and defects on the surface.
It is a barrier and insulator against the resin that may leak from the applied surface, and preserves the decorative appearance, and increase use-time.
With its high adhesion feature, it bonds the wood and the topcoat.
It allows to increase the efficiency with fast drying and short sanding time.
With its fungicidal characteristic, it protects the wood from factors that cause deformation such as fungus and mold.
With its breathing and water repellent feature, it allows the wood to give interior moisture out, and prevents the wood from excessive moisture.
It prevents the wood from environmental factors.
Fast dry, easy sanding.
Easy cleaning of application tools.
Esfera Exterior Primer, which can be easily applied with brush, roller and spray gun, increases the yellowing resistance of the final coat thanks to its water-based acrylic formula.
It is easily applied by dipping, pouring, cloth, brush, roller, airbrush.
No thinning required.
1 liter product for 12-18 m2 area at one coat.
Should be used 50-80 gr for area of 1 m2.
The internal moisture values of the wood should be between 10%-12% in soft woods and between 14%-15% in hard woods.
Dust hold dry-time is 20-30 minutes, touch drying time is 30-60 minutes, sanding drying time is 1-2 hours and stacking drying (curing) time is 24-36 hours. These drying times are determined according to 25°C temperature and 45-65% relative humidity, but may vary depending on environmental conditions.
Dust hold dry-time is between 20-30 minutes.
Touching dry-time is between 30-60 minutes.
Sanding dry-time is between 1-2 hours.
Stacking dry-time (curing) is 24-36 hours.